Cables and straps replacement parts for CENTR equipmentUpdated a month ago

Quick Answer

CENTR offers replacement cables for all equipment models ranging from $20-$60 each depending on the model and cable type. Cables are sold individually, not as sets. Resistance straps are also available for specific models like the CMG1.1 (Part #104914). Contact [email protected] with your equipment serial number to order the correct cable or strap for your model.

Pricing and Availability Disclaimer

Important: The pricing and part specifications listed in this article are provided for general guidance only and were accurate as of November 2025. Prices, availability, and specifications may change. For current pricing and availability, always contact CENTR support at [email protected] or 714-738-1729 before placing an order.

Replacement Cables by Equipment Model

CENTR manufactures cables specific to each equipment model. Cables are not interchangeable between models, so it's critical to identify your exact equipment model before ordering.

FT1 (Functional Trainer 1) Cables

• FT1 Cable (GM692-500-001CY): $40 each
• FT1 Upper Cable: $40 each
• FT1 Lower Cable: $40 each

Notes:

• Most commonly requested part: Upper cables (frayed/shredded from use)
• Subject to availability (may be on back order)
• Main weight stack cables and pulley cables
• Part numbers verified from actual orders

FT2 (Functional Trainer 2) Cables

• FT2 Upper Cable: $40 each
• FT2 Cable (095-500-003): $40 each
• Upper/Lower cable assemblies available

Notes:

• Upper cables most frequently replaced (frayed/shredded from heavy use)
• Cables sold individually, not as sets
• Compatible with FT2 serial numbers starting with 4-20-XX

FTX (Functional Trainer X) Cables

• FTX Cable: $50 each

Notes:

• Higher price point than FT1/FT2 cables
• Warranty covered if within warranty period
• Premium cable for advanced functional trainer model

M2 (Multi-Gym System 2) Cables

• M2 Upper Cable: $50 each
• Weight stack cable assembly

Notes:

• Used for main weight stack cable runs
• One of the more expensive cable replacements

M3 (Multi-Gym System 3) Cables

• M3 Ab Cable (old style): $40 each
• M3 Leg Extension Cable: $20 each

Notes:

• Old style vs. new style M3 parts may differ
• Verify serial number when ordering to ensure correct part compatibility
• Leg extension cable is lower cost due to shorter length

M5 (Multi-Gym System 5) Cables

• M5 Press Arm Lower Cable (870500001): $20 each
• LP3-M5 Cable (872-500-006): Contact for pricing

Notes:

• Press arm cable is one of the most affordable cable replacements
• Part numbers critical for accurate fulfillment

SCS (Smith Cable System) & SCS202 Cables

• SCS Lower Cable (GM698-500-001): $60 each
• SCS Upper Cable (GM698-500-002): $60 each
• SCS Row Cable (GM698-500-003): $60 each
• SCS Guide Cable (GM698-500-004): $60 each

Notes:

• SCS cables are premium priced at $60 each
• Multiple cable types available for complete system
• All cables sold separately, not as sets

SF3.2 (Smith Functional Trainer 3.2) Cables

• SF3.2 Cable: $40 each
• Main weight stack cables (left and right)

Notes:

• Compatible with Costco-purchased SF3.2 units
• Requires serial number verification (format: SF3.2-4-22-06-XXXXXX)

Cable Pricing Summary

Economy Cables: $20-$40 each

• M3 Leg Extension: $20
• M5 Press Arm Lower: $20
• FT1 Cables: $40
• FT2 Cables: $40
• SF3.2 Cables: $40
• M3 Ab Cable: $40

Premium Cables: $50-$60 each

• M2 Upper: $50
• FTX Cables: $50
• SCS Cables (all types): $60

Important: Prices are retail (end customer) pricing. Authorized dealers and service technicians may qualify for dealer pricing (typically 50% of retail).

Resistance Straps

CMG1.1 (Centr Multi-Gym 1.1) Resistance Straps

• Resistance Strap (Part # 104914): Warranty covered within warranty period

Notes:

• Straps subject to wear from regular use
• Free shipping courtesy if within 2 years of purchase
• Part number required when ordering: 104914
• Frayed/broken straps typically covered under warranty

When to Replace Cables and Straps

Knowing when to replace cables and straps is critical for safety and equipment performance.

Signs Your Cable Needs Replacement

1. Fraying: Outer coating damaged, metal strands visible
2. Cable operation rough or jerky: Even after lubrication and adjustment
3. Metal strands exposed: Indicates significant wear
4. Cable broke or split: Immediate replacement required
5. Visible rust or corrosion: Compromises cable strength

Signs Your Strap Needs Replacement

1. Fraying fabric: Threads coming loose or separating
2. Stitching damage: Seams coming apart
3. Material thinning: Strap noticeably thinner in areas
4. Discoloration or cracking: Material degradation

Safety Note: Do not use equipment with damaged cables or straps. Failure during use can cause injury.

Cable and Strap Lifespan

Expected lifespan varies based on usage frequency and weight load:

Cable Lifespan

• Heavy use (daily): 2-5 years typical
• Moderate use (3-4x/week): 5-10 years typical
• Light use (1-2x/week): 10+ years

Factors Affecting Cable Lifespan

• Frequency of use
• Weight load (heavier loads = faster wear)
• Proper maintenance (lubrication, cleaning)
• Environmental conditions (humidity, temperature)
• Quality of installation

Strap Lifespan

Based on actual customer experience:

• CMG1.1 resistance straps typically last 2-5 years with regular use
• Heavy resistance work shortens lifespan
• Proper storage extends life (avoid direct sunlight)

Cable Maintenance to Extend Lifespan

Proper maintenance can significantly extend cable life:

Regular Inspection

• Check cables monthly for fraying, wear, or damage
• Look for exposed metal strands
• Check cable routing through pulleys (should run smooth)
• Inspect connection points for wear

Lubrication

• Lubricate guide rods regularly
• Use silicone-based lubricant (not WD-40)
• Reduces friction and cable wear
• Follow equipment manual for lubrication schedule

Cable Tension Adjustment

• Adjust cable tension if machine operation becomes jerky
• Video guide available: https://www.youtube.com/watch?v=MEZLmGTR_7w
• Proper tension extends cable life

How to Order Replacement Cables and Straps

Step 1: Identify Your Equipment

You'll need:

• Equipment model: FT2, M5, SCS, CMG1.1, etc.
• Serial number: Located on white sticker on equipment frame
• Specific cable needed: Upper, lower, press arm, row, etc.
• Photos of damaged cable: 2-3 angles (if cable is damaged)

Step 2: Contact Support

Email: [email protected]
Phone: 714-738-1729

Subject Line: "Replacement Cable Order" or "Replacement Strap Order"

Include:

• Equipment model and serial number
• Cable/strap needed (e.g., "FT2 Upper Cable")
• Part number if known
• Quantity
• Purchase date (for warranty verification)
• Photos of damaged part
• Shipping address

Step 3: Warranty Verification

Support will check if your cable/strap qualifies for warranty coverage:

• Within 1 year: FREE cable/strap, you pay shipping ($15-$20)
• Within 2 years: FREE cable/strap, FREE shipping
• Over 1 year: You pay cable cost + shipping

Step 4: Order Processing

• Sales Order (SO#) assigned
• Invoice sent (if out of warranty)
• Payment required before shipment (out of warranty orders)
• Parts ship in 1-2 weeks
• FedEx tracking sent via email
• Delivery in 5-7 days (domestic US)

Cable Compatibility

Cables are model-specific and not interchangeable:

• FT1 cables do NOT fit FT2 equipment
• SCS cables do NOT fit M5 equipment
• Cable length, diameter, and connections vary by model

Always provide your exact equipment serial number when ordering to ensure you receive the correct cable.

Common Cable Questions

Can I use universal cables instead of CENTR-specific cables?
No. CENTR cables are engineered for specific load ratings and equipment specifications. Universal cables may not meet safety standards and could fail during use.

Why are SCS cables more expensive than FT2 cables?
SCS cables are premium cables designed for heavier-duty Smith Cable System equipment with higher specifications and load ratings.

How do I know if I need upper or lower cable?
Check your equipment manual or send photos of your setup to support. They'll identify which cable you need based on photos and serial number.

Can I order cables in sets to save money?
Cables are sold individually. However, if you're ordering multiple cables, contact support about combined shipping to potentially save on shipping costs.

What's the difference between old style and new style M3 cables?
M3 equipment has been updated over time. Your serial number tells support which cable version you need. Always provide serial number when ordering.

Are cables covered under warranty?
Yes, if the cable is defective or breaks due to manufacturing defect within the warranty period (typically 1 year). Normal wear and tear after 1 year is not covered.

Installation

Most cables can be installed by customers with basic tools:

• Equipment manuals available: https://inspirefitness.com/pages/product-manuals-and-videos
• Manuals include exploded diagrams showing cable routing
• Professional installation available through fitness showrooms

Safety Reminder: Ensure cable is properly routed through pulleys and secured at both connection points before using equipment.

Still Need Help?

For cable and strap replacement orders or questions:

Email: [email protected]
Phone: 714-738-1729

Include your equipment serial number and photos of damaged cables for fastest service.