FAQsUpdated 9 days ago
What comes with the M5, and what add-ons are available?
The M5 includes two double D low row handles, an aluminum lat bar, an aluminum curl bar, and two rubber D-handles. Optional add-ons include two 5 lb add-on weights, a leg press, an ab bar, a sport handle, a triceps rope, multi-ring D-handles, and an ankle strap.
What are the dimensions and weight?
The M5 measures 88 inches wide, 94 inches long, and up to 85 inches high, and weighs 900 lbs. With the optional leg press, it measures 124 inches long. Its L-shaped design fits into a corner. Keep bystanders at least 5 feet away while the machine is in use, and keep it clear of walls and furniture. We recommend placing a rubber mat underneath to protect wood flooring or carpet during assembly and use.
Can two people use the M5 at the same time?
Yes. The M5 has two independent weight stacks, so two people can work out at once. Please follow all safety guidance in the manual, including keeping bystanders at least 5 feet away and keeping children off the machine.
What stations does the M5 have?
The M5 has two press arms, a seated leg curl and leg extension station, a preacher curl station, a row station, a lat station, and free movement handles. The manual also includes a calf raise block. The machine has several pulleys for cable exercises.
What are the resistance ratios?
The lower pulleys have a 2:1 ratio. The lat, row, and curl pulley has a 1:1 ratio, and the leg extension has a 1:1 ratio. The leg curl has a 4:3 ratio, the leg press has a 1:2 ratio, and the press arm has a 2:1.2 ratio.
What tools do I need for assembly?
You’ll need a metric socket set with 16 mm, 17 mm, 18 mm, and 19 mm sockets, matching wrenches, an adjustable wrench, a tape measure, and a rubber mallet. The 4 mm, 5 mm, and 6 mm hex keys come in the hardware packs. Assembly has 19 steps, and Step 1 requires two people to complete safely.
How do I assemble the M5?
Follow the step-by-step instructions in order. Don’t tighten the hardware in Step 2 until the manual tells you to. In Step 19, don’t mix up the shorter M6 × 12 mm bolts and the longer M6 × 15 mm bolts, since that can cause assembly problems. Refer to the cable chart in the manual to identify each cable, and make sure each cable runs between the pulleys and the cable retainer rods, not over them.
How do I adjust the seat height?
Pull the pop pin on the seat stem to lower the seat to a comfortable height, then reset the pin so it locks in place.
Who can use the M5, and what safety precautions should I follow?
Keep children off the machine at all times, and keep bystanders at least 5 feet away while it’s in use. Don’t hang from the press arm, since it isn’t designed to support body weight. Keep the machine away from walls and obstructions, and use it only for its intended purpose. Don’t use attachments the manufacturer doesn’t recommend. Keep your hands clear of the pinch points on the machine. Consult your doctor before starting any exercise program, and stop immediately if you experience shortness of breath, pain, or dizziness. Warm up before you train, control the weight through the full range of motion, and don’t hold your breath during each set.
Can I use the M5 outdoors?
No. The M5 is for indoor use only. Humidity can cause rust on parts such as the guide rods, which can affect how the machine works. Don’t use or store it outdoors.
How do I maintain the M5?
Every week, inspect the links, pull pins, spring clips, swivels, and weight stack pins, along with the cables and their fittings and the tautness of the shrouds. Clean the upholstery weekly. Every three months, inspect the accessory bars and handles, decals, and anti-skid surfaces, and tighten any loose nuts and bolts. Clean and lubricate the guide rods with a Teflon-based lubricant, and lubricate the seat sleeves and plastic slides. Wax the glossy finishes once a year. Replace cables, belts, and connecting parts every two years. Inspect the cables for splitting, cracking, fraying, or flat spots, and replace any cable at the first sign of damage. Also inspect the straps for wear, and replace them if they’re damaged.
What should I do if the cables stretch or the tension seems off?
Cables stretch over time, so check the slack periodically. The manual calls for adjusting cable tension as needed but doesn’t include specific adjustment steps for the M5. If you’re not sure how to adjust a cable, or if the problem continues, contact our support team.
What warranty comes with the M5?
The residential warranty is limited lifetime. The product page also lists a light-commercial warranty of limited lifetime on the frame and 10 years on parts. You can register your machine at inspirefitness.com/pages/warranty-registration. Warranty coverage applies to the original purchaser and isn’t transferable to a new owner. To file a claim, you’ll need your sales receipt, which shows the purchase date, model, and serial number. Your serial number is on the machine’s label, and the front page of the manual has space to record it. Our support team may also ask for your postal code and a photo of your receipt. Warranty parts must be returned in their original container, and you’ll be responsible for shipping. Service should only be performed by an authorized retailer, since service by anyone else can void your warranty.
Where can I get replacement parts or cables?
Request replacement parts on the Inspire Fitness part request page at inspirefitness.com/pages/part-request. Include your machine’s serial number and the name of the part you need. Use only genuine Inspire parts, since other parts can void your warranty and could cause injury.
Does the M5 include a Centr membership?
Yes, the M5 includes 3 free months of Centr Digital Coaching with your purchase. Members get personalized recommendations and coaching from Centr’s team to support their movement, meals, and goals.
Still need help?
Reach out to us at [email protected] and our team will be happy to help.